Skip to content
Baja Designs Soltek LEDgend LED UTV lights Baja Designs has always been your one-stop shop for all your UTV lighting needs, from race to recreation. Continuing to use the latest technologies available, Baja Designs introduced the NEW LEDgend LED light, which was tested during the 2007 Baja 1000. The LEDgend proved that it deserved to be a member of the Soltek UTV Lighting Systems family, and its performance is truly legendary. Featuring 18 LEDs and a durable polycarbonate lens which incorporates race inspired optics and serves as a built-in rockguard, the LEDgend is truly in a class of its own. With a true pattern, instead of a large… Continue Reading »
Walker Evans Racing shocks for the Teryx Kawasaki Teryx OE Shocks • Billet aluminum design • OE replacement • Designed specifically for Kawasaki Teryx applications • Piggyback reservoir standard • Standard 16 position compression adjuster • ½” Bearings standard • Rebuildable • Spring included • Teryx Long travel available • Custom lengths available Continue Reading »
Speedwerx Arctic Cat Prowler High Flow Intake Kit 2008 Arctic Cat PROWLER 650 XT / 700 H1 EFI XTX High Flow Intake Kit Our high flow intake kit adds 4-5 real hp, you will see huge bottom end and midrange gains. It comes with all necessary mounting hardware for your Arctic Cat Prowler: K&N intake and case breather filters w/ outerwears. Kit works in all conditions, from dry and dusty to wet and muddy. Intake height is capable of riding in water up to 3 feet in depth, so get in there with your Prowler UTV and get dirty. Applications: 2008 Prowler 650 H1 XT & 2008 Prowler… Continue Reading »
New Teryx Wheel Spacers by Dunegear KAWASAKI TERYX WHEEL SPACERS 1.500 WIDE 2 SETS 4 PCS • Brand-new design • Super lightweight design compared to any competitor’s. • These spacers will widen the stance of your Teryx by 3 inches total, 1-1/2 inches per side. • Much more stable than stock. • 2 sets, which equals 4 pcs visit www.dunegear.com for all your UTV needs $185.00 Continue Reading »
UTV Polaris Ranger Billet Cup Holders from Dunegear Set of billet cup holders for the Polaris Ranger. Unlike our competitors, this unique design allows you to snap them into place like the stock plastic ones. This way, no one can steal them, and they won’t fall out during a hard Polaris UTV off-road drive. Machined from domestic material 6061-t6 aerospace aluminum visit www.dunegear.com for Polaris Ranger and RZR products. $70.00 Continue Reading »
Soft Cab Enclosure System for Arctic Cat Prowler by SEIZMIK Key Features: This durable full cab enclosure system for the Arctic Cat Prowler UTV has side and rear ventilation with no roof sag; and has an amazing fit and finish second to none. It offers the same weather protection of a hard enclosure but it’s super lightweight so it won’t weigh your Prowler down. The roof has tension straps help prevent sag and an integrated rear zip-up window. The entire enclosure is covered with a sturdy, marine grade, UV protected, PVC coated denier nylon skin to keep you, the rider, warm and dry in your Arctic Cat Prowler… Continue Reading »
Advanced Soft UTV Cab Enclosure System for Yamaha Rhinos by SEIZMIK Key Features: This durable full cab enclosure system has front, side, and rear ventilation, no roof sag, and has an amazing fit and finish second to none. It offers the seal and security of a hard enclosure but it’s super lightweight so it wont weigh your Yamaha Rhino UTV down. Structural roof and door frames are extremely sturdy with an industrial grade, UV protected, PVC coated denier nylon wrapping. Available in these UTV Models: Yamaha Rhino - 2007-2008 Color options: Black UTV Door options: The aluminum door system offers 3 different easy and quick to configure options to accommodate… Continue Reading »
Soft Cab Enclosure System for Polaris Ranger by SEIZMIK Key Features: This durable full cab enclosure system has front, side, and rear ventilation, no roof sag; and has an amazing fit and finish second to none. It offers the same weather protection of a hard enclosure but it’s super lightweight so it won’t weigh your Ranger down. Easy to install aluminum roof support straps help prevent roof sag and has an integrated rear zip-up window. The entire enclosure is covered with a sturdy, marine grade, UV protected, PVC coated denier nylon skin. Available in these UTV Models: Polaris Ranger 700 500 XP 4x4 4x2 (’02-08) Color options:… Continue Reading »
UTV 72″ and 60″ Snowplows by CYCLE COUNTRY UTV 72” Straight Snowplows Key Features: The UTV Blade System combines our 72” UTV Straight Blade with heavy-duty push tubes and a heavy duty mounting kit. The UTV Blade is a 72” heavy-duty steel blade with 3 plowing positions. It comes with heavy-duty steel skids, which are designed to rotate freely for extended and even wear. The heavy-duty push tube features a reinforced hinge. The UTV Blade System is designed to work on utility vehicles such as the Mule and Ranger. These vehicles WORK HARD and this plow and push tube were built to withstand daily HARD… Continue Reading »
Warn UTV Plow Blades, Mounting Kit, and Plow Base UTV Plow Blades The highly engineered WARN UTV plow blades are made from heavy gauge steel backed up by extra-heavy ribbing for added rigidity, making these plows the toughest on the market. WARN UTV plow blades can be had in either 66” or 72” widths. Both feature heavy-duty adjustable gravel skids with quick-release clips and a replaceable steel wear bar. Price: 66” blade: $446.31 // 72” blade: $446.31 UTV Plow Mounting Kit and Plow Base WARN UTV Plow Mounting Kits features a unique and exclusive design allowing for quick connect and disconnect of the self-standing plow. They do not require… Continue Reading »
Full Cab Enclosure with Lexan Windshield by MAMMOTH DESIGNS Key Features: Mammoth Designs Full Cab Enclosure with Lexan Polycarbonate Windshield is handcrafted, & measured to fit with precision. This Full Cab is easily convertible between mini cab & full cab applications. Features Professional Grade Marine Textile shell which is Waterproof, Puncture Resistant, Tear Resistant, Abrasion Resistant. Custom design allows for access to the storage compartment under the hood. The windshield is constructed of durable Lexan Polycarbonate, complete with stainless steel mounting hardware! Doors & rear window are constructed of durable Aquaview Vinyl. Roll Away front doors provide the option of taking your doors with you,& they conveniently stow-away… Continue Reading »
Heated UTV Seat Cover – Kolpin Key Features: For you hearty, cold weather UTV riders, or those of you who just enjoy a warm seat, Kolpin offers a heated version of our new UTV Bucket Seat Covers designed with an automotive style heating element with overheat protection. The standard 12v outlet plug includes an on/off switch and extra power point adapter that connects directly to the battery. Though heated, this version of our UTV Seat Covers provides the same comfort and style while on the trails. The seat cover’s ergonomic design provides maximum comfort and cushioning thanks to our exclusive Gel-Tech foam padding. The adjustable form… Continue Reading »
Modular Rapid-Convertible System (RCS) – Curtis Industries Key Features: Curtis Industries has introduced a new, revolutionary, modular cab system for the Yamaha Rhino utility vehicle that allows rapid transformation from a fully enclosed cab to an open-air ride in 60 seconds. The Curtis Rapid Convertible System (RCS) allows the user to choose one or all components for maximum flexibility as the weather changes. A simple ROPS base frame with cab receiver mounts provides safety and easy installation of the modular components. The roof, windshield and rear panel feature a unique, easy on, no-tools, pin to slot connection and a heavy duty quick release latch. The strong but… Continue Reading »
Bestop Supertop for UTVs Key Features: Premium brand fabric attaches directly Roll cage with heavy-duty composite buckles and fittings for long life. • Included with each Super top are written installation instructions with detailed pictures. • DOT approved Rear windows and windshield. • Over 50 years of soft top manufacturing experience. • Hardware is chemically treated and powder-coated for rust resistance to ensure long life. • Trailerable. Available in these UTV Models: Yamaha Rhino 660-450, 08- Current Polaris RZR, 08- Current 3000 Series Kawasaki Mule, 01- Current Arctic Cat Prowler, 06-Current Color options: All Supertops are available in Black currently. Door options: Optional Element Door System… Continue Reading »
KMS Aftermarket Yamaha Rhino 660 Cylinder Stud Kits KMS Performance has designed and produced a replacement to the OEM Yamaha Rhino cylinder head and case bolts. Stop the head gasket failures and cracked cases! Stop using low-grade materials that stretch. There are 2 kits available for the Yamaha Rhino 660. There is also a cylinder head kit available for the Raptor 700. Custom designed CYLINDER STUDS using the best materials available. RHINO 660 CYLINDER TO HEAD STUD KIT: Increased torque from 27 lb to 40 lb Allen head for easy removal and Installation No drilling or tapping required Replaces all 6 stock bolts Cost-effective upgrade Used for all… Continue Reading »
Replacement Bungs for UTV Rollcages Building your own cage, adding on a cooler rack or spare tire carrier? Bungs are new mild steel fab clamps can be used for many things come in 1.50” & 1.75” .120 wall tubing. go to: 480.982.4866 or visit: www.rhinopartsandperformance.net Continue Reading »
New Kawasaki Teryx CVT filter New for the Kawasaki Teryx, the AFE CVT filter. We also carry the Rhino 700 CVT & Rhino 660 CVT • Cleans with soap and water. • Protects expensive CV transmission. • Extend the life of your CVT. go to: 480.982.4866 or visit: www.rhinopartsandperformance.net Continue Reading »
ITI Performance – UTV sway-bar system When I got started in off-roading, it began with the first vehicle my parents would let me drive: A Chevy Conversion Van. My parents probably thought there’s no way I could get into any trouble in that thing, but they were wrong for 3 reasons. It had a 350 small block, a limited slip rear differential, and room for about 20 of my friends if we didn’t mind getting a little close. Needless to say, among the other bad ideas I had as a young high school kid, I took that thing off-roading to go camping. Even though I got… Continue Reading »
Yamaha Rhino Bed Cover by Diamondback Covers The Skinny Deck cover made from .08 aluminum diamond plate and comes with all stainless external hardware. Four tie-down cleats to secure cargo. Lid lifts with hydraulic lifts and has a keyed lock. Works with all model years from 2004 to 2008 Yamaha Rhinos. The Bottom Line This product is a great addition to the Rhino for keeping cargo in its place and out of the elements. The top deck has a carrying capacity of 250 lbs, and with four cleats on each corner you can secure any load. Perfect for hauling a spare tire on trips or hauling out game. We tested this in a… Continue Reading »
Fully Adjustable Polaris Ranger Shocks by Works Shocks One of the things the Polaris Rangers have been plagued with up until model year 2009 is a non-adjustable front strut suspension. While this has proved to be very successful for Polaris through the year for providing a nice plush ride, hence their slogan for “Hardest Working, Smoothest Riding,” the problem has been that it’s not great for more aggressive riders. There’s been a few companies come out with stiffer springs, different struts, but nobody has ever come out with a full front strut like Works Performance now has. Not only that, Works came up with a very unique way… Continue Reading »
Warn Industries introduces the Ultimate UTV Winch Warn Industries, the leader in powersports performance accessories, has raised the bar again by creating the ultimate winch for UTV and side-by-side enthusiasts! Introducing the latest addition to the Extreme Terrain winch lineup: The WARN® XT40. The XT40 showcases a number of amazing features, such as a Wireless Control System, 50’ of lightweight, easy-to-handle synthetic rope, 4,000 lbs. of pulling power, a patented disc brake, and a sealed all-metal three-stage planetary geartrain. These features add up to the ultimate UTV winch, making the XT40 a must-have for the side-by-side rider looking to take their vehicle to the next level. The XT40’s… Continue Reading »
ITP Low Profile Terra Cross RT 25x14 LOW-PROFILE TERRACROSS R/T XD FOR EXTRA SPORTY PERFORMANCE Delivering yet another innovative industry first, ITP has just released two new TerraCross R/T sizes designed for even better sport-oriented performance. Now available in a 25x9R-14 front and a 25x10R-14 rear, this new sizing results in an extra-low profile with less sidewall flex for precise steering and exceptional control. Along with significantly better handling, these new sizes are lighter than current 26-inch options, they reduce horsepower losses and also allow the operator to retain OEM gearing characteristics. This is what the high-performance crowd has been waiting for! Of course these new… Continue Reading »
Yamaha Rhino Shocks from Progressive Suspension High performance UTV suspension does not have to mean a high price tag and Progressive Suspension’s latest effort is sure proof of this sort of thinking. Their new for 2008, 425 Series shocks are aimed at the user who has added a rear cage and seating, is hauling heavy loads or who simply wants a better performing suspension without having to break the bank. Available in Standard or Heavy Duty spring rates, the 425 Series features a beefy 16mm shaft and a twin tube, high pressure nitrogen charged damper, which is wrapped in a powder coated coil spring with a… Continue Reading »
Yamaha Rhino Power Steering The Skinny New from Unisteer Performance Products is an electric power steering unit for the Yamaha Rhino. This unit fits 2004-2008 models and reduces the overall steering effort. They also have units for the Polaris Ranger and RZR, Kawasaki Teryx and Mule, John Deere Gator and Cub Cadet Volunteer. These units have a small compact electric power steering motor that is built for those of us with larger tires, suspension modifications or anyone that drives with heavy payloads. Also available for the Rhino, RZR and Ranger is “RackZilla” a heavy-duty factory replacement rack and pinion. The Bottom Line Since UTVs… Continue Reading »
UTV Concepts Rear Light bar and Stereo Rack System The Skinny UTV Concepts is offering an out-of-the-box system that comes complete with two rear tail/brake lights, two cargo bay lights, two license plate lights, one interior dome light and license plate inserts. The light bar mounts on the stock Rhino cage at the roof line for optimal safety for those following you. The system wires quickly into your stock wiring harness and does not eliminate the factory tail/brake lights. Also from UTV Concepts, they have taken all of the guesswork out of building a stereo system for the Rhino by offering an out-of-the-box product that sounds as great as… Continue Reading »
Speedwerx 2008 Arctic Cat 700 Slip-on Exhaust All of our exhaust products undergo countless hours of designing, development, and testing to ensure our customers are getting the best exhaust available for their machine. We offer 3 different stages of Arctic Cat exhaust kits, first being our slip-on system, which, for the most part, is just a slip-on silencer for your machine. Then we get into our full systems. Most full systems run from the engine on back to the silencer. Last but not least, we offer what we call our Speed Kits. Our Speed Kits include either one of our slip-on Arctic Cat exhaust systems or full… Continue Reading »
Speedwerx 2008 Arctic Cat 700 Clutch Kit Hypershift Arctic Cat clutch kits are one of the most valuable products available when it comes to enhancing the performance of your Arctic Cat UTV. Each kit is designed and rigorously tested by the staff at Speedwerx to insure that it will increase your machine’s acceleration, backshift, and all around Arctic Cat performance. We offer kits for most applications. We have kits for stock machines, piped or slightly modified machines, stock machines with oversized tires, piped or slightly modified machines with oversized tires and kits for higher elevations as well. Most kits but not all include: primary spring, secondary spring,… Continue Reading »
Rancho RZR bumper and shocks Rancho who recently celebrated 50 years of providing products to the off-road industry has entered the UTV industry with products made for the Yamaha Rhino and Polaris RZR. This rear cage attaches to existing points on a Rhino and provides a place to put a spare tire, gas cans, and a large cooler. Here’s another great looking bumper for Rhino owners. In addition, you can see how they’ve braced the front suspension mounts for their 4 over long travel kit. If you’d like to keep your RZR as close to stock width as possible, adding aftermarket shocks such as these… Continue Reading »
Radflo UTV Jack Radflo Suspension Technology Releases Innovative New UTV Off-Road Jack Hydra-Jac Promises Faster, Easier Tire Changes Without Breaking Your Back If you have ever tried to change a UTV tire off-road using an ordinary jack, you know how frustrating and even dangerous the exercise can be. The emergency jack supplied with your vehicle is useless if you have a suspension lift. And that old-fashioned cast iron jack that you have been lugging around is great for agricultural purposes, but its not exactly ideal for todays high tech off-road machines. The awkward size makes it difficult to store in your UTV, the… Continue Reading »
Machined clutch for Yamaha Rhino 700 KMS Performance is excited to offer a new machined clutch sheave for the 2008 Yamaha Rhino 700 EFI. A CNC Machined clutch sheave is designed to allow the rollers to expand further than an OEM sheave. This additional expansion will increase top speed of the machine. Extensive testing was done on many variations of machined clutches. The best combination was put together for this CNC machined clutch to reach optimum speed and power. Assembly is straight forward and includes an installation video on CD. “The addition of a machined clutch has shown significant improvement to performance for our customers.” as… Continue Reading »
ITP SS 212 Alloy UTV wheel ITP has added to its ever-growing SS Alloy UTV wheel line with the Indy introduction of the new SS212. This one-piece UTV wheel, with a distinctively muscular style, is available in three head-turning finish options: bright, diamond-cut machined with black accents (topped with a tough clear coat), a dramatic matte black, and dazzling, show-quality chrome. As with all of ITP’s SS Alloy wheels, a custom SS wheel cap is included. They are available in a 12x7 size, as well as unique 14x6 and 14x8 sizes designed specifically for front and rear applications, respectively. These dedicated sizes provide more precise fitment… Continue Reading »
Gibson Teryx Exhaust System – Superflow SFT Gibson Performance the leader in aftermarket performance exhaust has released a powerful performance exhaust for the RUV that is changing the Side x Side Market. The Teryx demands a strong high flow performance muffler that will add to the naturally big power of the 750 V-twin engine. With a real wheel horse power gain of 7hp and improved acceleration you will be guaranteed to have the top performing UTV on the market. With Gibson’s Superflow SFT non packed performance muffler you will be guaranteed a consistent low level of sound and performance quality for the duration of your Teryx exhaust… Continue Reading »
Gibson Rhino Exhaust System – Superflow SFT Gibson Performance the leader in aftermarket performance exhaust has released a powerful performance Rhino exhaust system for the popular Yamaha 700EFI. Compliment your new EFI power plant with an extra gain of 5 rear wheel horse power and 6 foot pounds of torque. With Gibson’s SFT Superflow muffler you can be guaranteed a consistent low level of sound and performance quality for the duration of your UTV’s lifetime. Utilizing a compression spring fitting allows plenty of movement to handle all types of abuse eliminating the possibilities of breakage. This bolt on performance system is offered in a stainless steel or… Continue Reading »
GBC Motorsports Mud Hog tires The Skinny The MUDHOG is a true pure mud tire. Its thick, deep lugs can handle the muddiest and wettest of conditions. The MUDHOGs lugs are dimpled, saving weight and providing additional biting-edges to scoop away the mud. Tread lugs also overlap the centerline of the tire, increasing traction and creating a better ride in hard terrain. This heavy-duty 6-ply construction provides maximum puncture resistance. The Bottom Line We had a chance to test 3 sets of GBC Motorsports 27” Mud Hogs at the Mud Nationals, and the difference between the Mud Hogs and stock is huge. And, before we… Continue Reading »
Desert Molding Concepts Yamaha Rhino Gas Pedal The Skinny Developed to make the gas pedal on the Yamaha Rhino more user friendly. Works similar to an automotive style gas pedal. Lends itself to easy operation with less fatigue and more comfort. Works with all model years from 2004 to 2008 Yamaha Rhinos. The Bottom Line This is a quality product with great results for long trips on the trail. If your foot and ankle have ever tired from driving, this Yamaha Rhino pedal allows some relief by enabling more surface area for your foot to rest on. It is also handy for a shorter person not able… Continue Reading »
Black Rhino 700 Performance Ignition Module Introducing the all-new Stage II 700 Rhino Performance Ignition Module from Black Rhino Performance. This Performance Ignition eliminates the stock Rhino ignition’s speed limiter, provides a performance ignition curve (+4 degrees over stock), and raises the stock rev limiter to 8000 RPM. It is completely compatible with all of the Yamaha Rhino 700’s electronic components. This is a piggyback module which supplements the Rhino factory ignition. Ignition and fuel injection control are combined in the same module with an easy-to-install wiring harness. This Performance Rhino Ignition also provides increased spark energy which makes for easier starting and improved throttle response.… Continue Reading »
Axia Alloys UTV iPod Mount The Skinny These unique UTV ipod mounts are the perfect finishing touch to your custom RZR or Rhino sound system. Its silicone strap and embossed rubber backing plate provide a solid, rattle-free design that will not scratch or damage your iPod in even in the most demanding offroad environment. Two styles are available, either Surface Mount, which is a versatile mount that can be mounted on the dash, inside the glove box, on top of the center console, virtually any surface that you can tighten a nut on the backside, or a cage mount. The cage mount version can be… Continue Reading »
